Bosch MUM 6630 UC Owner's Manual download pdf (Page 23)

23

CAUTION

Failure to make sure that the bowl is

properly seated on the drive coupling before

the power unit is turned On can result in

damage to the bowl and/or coupling.

Figure 21.

3. Engage the dough hook on the

drive pin by placing it in bowl, as shown

in figure 21b, and turning the dough

hook clockwise while pushing down until

it stops.

Figure 22.

4. Place the splash ring on the bowl,

making sure the tabs on the bowl fit

into the recesses in the splash ring,

and turn counterclockwise, see figure

22a. Then place the cover on the splash

ring so that the tabs on the splash ring

fit into the recesses in the bowl cover

and turn the cover counterclockwise to

fasten the bowl cover to the bowl. See

figure 22b.

The splash ring and cover should be in

place whenever the power unit is in

operation. The splash ring and cover

serve to prevent the escape of flour

dust at the beginning of the stirring and

kneading process, and also serves to

prevent accidental contact with the

moving dough hook.

Placing into Operation w/Dough Hook

Make sure that the power unit is on a

smooth, clean, suitable work surface and

switched to the Off position, “O/Off.” Unwind

the electrical cord to the necessary length

and plug into a convenient outlet. The mixing

bowl with dough hook is now ready for

operation. See table 1 for examples

demonstrating the use of the dough hook

attachment. Sample recipes may also be

found in the recipe section, at the back of

this manual.

Removing Contents

Before beginning to remove the contents

from the stainless steel bowl, make sure

that the power unit has been turned to the

Off position, “O/Off.” Remove the cover and

splash ring by turning clockwise and lifting

off. Once the cover and splash ring have

been removed, the dough hook may be

removed by turning the hook clockwise

while lifting.

The mixing bowl can be removed from the

power unit by turning the bowl clockwise

while lifting.

The contents may now be used as desired.

Care and Cleaning

of Stainless Steel Bowl

The stainless steel bowl and its components

are dishwasher safe. It is recommended

that the drive pin be removed from the bowl

for cleaning, and that the pin, its gasket

and the inner bearing surface, where the

drive pin rides, be cleaned after every use.

After cleaning, a little vegetable oil placed

on the drive pin gasket will help to lubricate

the surface.

The power unit of the kitchen machine

should be cleaned using a clean, damp

cloth only. Never use coarse or caustic

cleaning products to clean this appliance.

Never immerse the power unit in water.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments