Bosch EX36 Instruction Manual download pdf (Page 10)

10 en | Installation Corner-mount No-grip Camera

F.01U.172.707 | 3.0 | 2011.02 Instruction Manual Bosch Security Systems, Inc.

3 Installation

3.1 Initial Preparations

– Determine the operating voltage at the installation site.

– Determine the optimum location for the camera. Refer to

Section 3.4 Mounting the Camera Housing.

– All units have been tested prior to shipment. After the

wiring has been reconnected, check the unit’s operation

before installation.

– Follow these installation steps in sequence:

3.2 Faceplate Removal

You must remove the faceplate prior to installation in order to

reach the mounting holes. You may need to change the

directional angle of the lens. Refer to Figure 3.1.

1. Place the camera housing on a flat surface.

2. Use the supplied hex key to remove the six screws holding

the faceplate into the housing.

3. Remove the square foam cushion attached to the camera

lens.

Installation Step PAGE

Faceplate Removal Page 10

Input Power Connections Page 12

Mounting the Camera Housing Page 13

Camera - Directional Adjustment Page 15

LED Adjustments Page 16

Camera Re-Assembly Page 18

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Bosch EX36 Instruction Manual Page 10