Bosch EX36 Instruction Manual download pdf (Page 14)

14 en | Installation Corner-mount No-grip Camera

F.01U.172.707 | 3.0 | 2011.02 Instruction Manual Bosch Security Systems, Inc.

3. Select a mounting surface capable of supporting the

combined weight of the unit and mounting hardware to

anticipate all expected conditions of both temperature and

vibration.

4. Secure all cabling.

5. Drill holes into the mounting surface. Depending on the

type of mounting surface (brick, wood, etc.), you may need

to pre-drill the holes for the mounting screws. Bosch

recommends that you use the housing as a drill template--

refer to Figure 3.5 for the location of the mounting holes in

the housing--to mark the location of the holes, and then

drill the holes. This way no burrs or debris will fall into the

housing.

Figure 3.5 Mounting Holes - EX36(N) Camera Housing

Note: Each arrow points to a mounting hole.

NOTICE!

If you are installing the camera on drywall, you must use #8

screws and #8 drywall nylon plugs or a superior connection.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Bosch EX36 Instruction Manual Page 14