Bosch EX36 Instruction Manual download pdf (Page 15)

Corner-mount No-grip Camera Installation | en 15

Bosch Security Systems, Inc. Instruction Manual F.01U.172.707 | 3.0 | 2011.02

6. Mount the housing using the supplied mounting screws.

7. Ensure that the power and video cables are not crimped or

stressed after the camera has been mounted.

3.5 Camera - Directional Adjustment

Both the camera and the LED array can be adjusted for

optimum picture quality. The camera lens can be tilted on its

axis via two adjustment screws on the mounting bracket. It can

also be moved closer to or farther from the viewing window.

1. Mount the Camera/LED Array Assembly into the housing.

2. Connect the video and power wires.

3. Check the picture for quality and directional alignment.

4. If you must adjust the camera’s viewing angle or picture

quality, remove the Camera/LED Array Assembly. Refer to

Figure 3.6.

Figure 3.6 Camera Directional Alignment

5. Loosen both adjustment screws for tilt or horizontal

directional alignment.

6. Once optimal position is obtained, tighten the screws.

Number Description

1LED Array

2Tilt Adjustment

3 Horizontal Adjustment

4 Camera/Lens Assembly

5 Adjustment screw

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Bosch EX36 Instruction Manual Page 15