Bosch 430 Operations Instructions download pdf (Page 10)

10 en | Safety Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05 Installation and Operation manual Bosch Security Systems

Environmental statement - Bosch has a strong commitment towards the environment. This

unit has been designed to respect the environment as much as possible.

Fuse rating - For protection of the device, the branch circuit protection must be secured with

a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current

line plug (a plug with one blade wider than the other blade). This safety feature allows the

plug to fit into the power outlet in only one way. If unable to insert the plug fully into the

outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for

earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.

If unable to insert the plug into the outlet, contact a locally certified electrician to replace the

obsolete outlet. Do not defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive

force or shock may damage the unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially regarding clearance from

power and lightning conductors and transient protection, must be in accordance with NEC725

and NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily accessible disconnect device

external to the equipment.

Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.

Rack-mount

– Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room

ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature (Tma) specified by the

manufacturer.

– Reduced Air Flow - Installation of the equipment in a rack should be such that the amount

of air flow required for safe operation of the equipment is not compromised.

– Mechanical loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

– Circuit Overloading - Consideration should be given to the connection of the equipment

to the supply circuit and the effect that overloading of the circuits might have on

overcurrent protection and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this concern.

– Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections

to the branch circuit (e.g. use of power strips).

SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits

should only be connected to other SELV circuits.

Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security

Systems cannot be held liable for any damage that results from missing video information. To

minimize the risk of lost digital information, Bosch Security Systems recommends multiple,

redundant recording systems, and a procedure to back up all analog and digital information.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 91 92

Comments to this Manuals

No comments

Bosch 430 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Bosch 430