Bosch 430 Operations Instructions Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
Video Recorder 430/451 Series Configuration menu | en 57
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v2.0 | 2012.05
6.4 Event
Use the Event menu to specify the desired behavior for an Input, detected Motion, or System
failures; also define how alarms are acknowledged.
6.4.1 Input
Figure 6.12 Event - Input
Inputs are always active on the unit.
Input Type
The Event behavior can be configured independantly for each channel.
N.O. - Normally Open causes an alarm to tigger only when the circuit closes
N.C. - Normally Closed causes an alarm to tigger only when the circuit is opened
Camera
Set the camera between 1 and 4, which is set to an alarm based on the input.
Relay output
Select the relay to trigger in response to the input.
PTZ
For the camera associated with the input, a PTZ preset can be sent to the camera to
move to a specified pre-position.
Enter a pre-position number from 1-255 for each of the PTZ cameras that should be
moved.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 91 92

Comments to this Manuals

No comments