Bosch 430 Operations Instructions download pdf (Page 68)

68 en | Configuration menu Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05 Installation and Operation manual Bosch Security Systems

6.6.6 Hard Disk

Figure 6.24 System - Hard disk

The Hard Disk menu gives access to settings that affect video retention as well as a means to

format the hard disk.

– Overwrite allows the unit to continuously record, overwriting the oldest unprotected

video on the hard disk with newer video.

–The Disk full warning sets the threshold as which point the unit triggers an alarm

indicating the drive is nearly full. This setting has no effect when Overwrite is in use.

– By default, the disk has only one partition where Continous and Event recordings are

stored. This is the case when Event Partition is set to 0%.

– The disk can be segmented into two partitions by setting the Event Partition to a value

greater than 0%. The first partition then stores video from Continuous Recording; the

second partition the events recording. The Event Partition specifies the percentage of

the hard disk dedicated to preserving video from Inputs and Motion.

– Auto delete sets a time window outside of which all video will be deleted from the unit.

This function is primarily reserved to meet legal requirement in some jurisdictions.

– Format erases all data from the selected partition.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

No comments

Bosch 430 Operations Instructions Page 68