Bosch DiBos Micro Installation Guide download pdf (Page 11)

DiBos/DiBos Micro Introduction | en 11

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

2 Introduction

2.1 System Description

The video system is a digital monitoring system that allows video images to be stored locally

and transmitted and evaluated at any place determined by you independently of distance and

location. The image data delivered by the video system provides additional information on the

magnitude of the danger and the developments before and after the event.

2.2 Unpacking

Check the packaging for visible damage. If anything is damaged during transport, please

inform the freight agency.

Unpack the device carefully. This is an electronic device and it must be handled carefully to

avoid damage. Do not attempt to put the unit into operation if components are damaged. If

parts are missing, inform your customer service representative or a Bosch Security Systems

salesperson.

The shipping box is the safest transport container for the device. Retain the box and the

packaging material for future use. If the device has to be returned, use the original packaging.

2.3 Power

Ensure that the power supply at the chosen location is stable and is within the values

specified for the device.

As this is an electronic device, the video system is sensitive to sudden voltage peaks, dropoff

and dropout.

To avoid damage to the electronic components and/or loss of data and ensure trouble-free

operation, we recommend installing an uninterruptible power supply (UPS).

Depending on the stability of the mains network, the following uninterruptible power supplies

are recommended:

– Mains networks with voltage peaks and voltage dropout:

Use of an offline UPS is sufficient (e.g. Pulsar ellipse 1000 for DiBos and Pulsar ellipse

600 for DiBos Micro).

– Mains networks with voltage peaks, voltage dropout and voltage dropoff:

Use of an online UPS is recommended.

For 1 video system, a UPS with at least 300 VA is required. If add-on devices (e.g. monitors,

sub-systems) are also to be protected, the capacity of the UPS must be raised accordingly.

2.4 Environmental

When choosing an installation location for the device, take the ambient temperature and

humidity into account.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 11