Bosch DiBos Micro Installation Guide download pdf (Page 128)

128 en | Connections DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

9.2 Connecting the ISDN Controller

The ISDN connection is established via the supplied adapter cable (with Western plug) on the

computer's S

interface.

To install the ISDN card, the computer must be next to the ISDN connection and the card

must be integrated in the computer.

For data to be transmitted, the connection must support the EURO ISDN (DSS1) protocol. S

connections in PBXs may first have to be enabled in the PBX. The data service must also be

enabled in the incoming and outgoing direction. The video system is delivered for EURO ISDN

ex-works.

ISDN socket TAE 8 on the S

interface of the video system (9-pin Sub-D socket)

ISDN socket IAE (RJ 45) on the S

interface of video system (9-pin Sub-D socket)

To be carried out by authorized personnel only!

NOTICE!

Only the card type Fritz! Card PCI V2.0 may be used.

1 Video system 5 Supplied adapter cable

2 ISDN controller (transmitter or

receiver)

6Western plug

3 ISDN adapter card socket 7 Only necessary for TAE sockets (not

included in delivery)

4 Ferrite core 8 ISDN connection

Sub-D socket TAE 8 plug Function

2 - SR1- - 4 (b1) Transmit wire

3 - SR2+ - 3 (a1) Transmit wire

4 - SX1- - 6 (a2) Receive wire

5 - SX2- - 5 (b2) Receive wire

Sub-D socket IAE 8 plug Function

2 - SR1- - 5 (b1) Transmit wire

3 - SR2+ - 4 (a1) Transmit wire

4 - SX1- - 3 (a2) Receive wire

5 - SX2- - 6 (b2) Receive wire

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 128