Bosch DiBos Micro Installation Guide download pdf (Page 130)

130 en | Connections DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

9.6 Connecting an ATM (Serial)

A maximum of four customer-operated ATMs or three customer-operated ATMs and one

access control system can be connected to the video system via an interface processor.

The following ATM connection variants are possible:

Variant 1:

The customer-operated ATMs are not far from the video system. The video system and

interface processor, as well as the interface processor and the ATMs, can be connected

together in such a way that the distance between each of them is less than 15 m.

Possible solution:

Connection of each ATM is made directly at the interface processor and is ATM-specific. The

distance between the video system and the interface processor, as well as the distance

between the interface processor and the ATMs, is a maximum of 15 m.

Connection principle:

Connection details:

1 Video system 3 Interface processor

2 Max. 15 m 4 ATM1 - ATM4

1 Video system 4 Interface processor

2 COM x 5 ATM1 - ATM4

3 Connection cable, 9-pin

E4E3 PCE2E1

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 130