Bosch DiBos Micro Installation Guide download pdf (Page 131)

DiBos/DiBos Micro Connections | en 131

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

Variant 2:

The customer-operated ATMs are further away from the video system. The video system and

interface processor, as well as the interface processor and the ATMs, cannot be connected

together in such a way that the distance between each of them is less than 15 m. The ATMs

are, however, close enough together to allow them all to be connected to the interface

processor in such a way that the distance between the interface processor and each ATM is

less than 15 m.

Possible solution:

Connection of each ATM is made directly at the interface processor and is ATM-specific. To

increase the range, two OVS are required between the video system and the interface

processor.

Connection principle:

Connection details:

1 Video system 4 Max. 1000 m

2 Max. 15 m 5 Interface processor

3OVS 6ATM1 - ATM4

1 Video system 6 Max. 1000 m

2 COM x 7 OVS 2

BR1 and BR2: Position 2/3

ST3: Pin 2 = receive line, Pin 3 =

transmit line

39-pin 8Interface processor

4 Connection cable, 9-pin, part no.

4.998.079.686 (1:1 connection)

9 To ATM1 - ATM4

5OVS 1

BR1 and BR2: Position 1/2

ST3: Pin 2 = transmit line, Pin 3 =

receive line

V24

(ST3)

OPTO

V24

(ST3)

E4E3 PCE2E1

NOTICE!

By re-plugging the bridges BR1 and BR2 in the OVS, it is possible to swap over the transmit

and receive lines.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 131