Bosch DiBos Micro Installation Guide Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
DiBos/DiBos Micro Connections | en 137
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
9.8 Connecting the DCF 77 Radio Clock
The radio clock is connected via a serial interface.
When retrofitting, the following installation must be carried out. Use the supplied installation
CD.
1. Connect the radio clock to the serial interface.
2. Log on as Administrator.
3. Select the interface.
Select Start > Control Panel > System.
Select the Hardware tab and click Device Manager.
In the tree structure, open the entry Ports with a double click and select the
interface, e.g. Communications Port (COM1) with a double click.
Select the Connection settings tab.
Enter the settings for the interface:
Baud rate:2400
Data bits:8
Parity:None
Stop bits:2
Protocol:None
Confirmwith OK.
4. Radio clock installation
Insert the installation CD.
Call up Setup.exe in Windows® XP Explorer.
Select Install server and click Next.
Select the target directory for the program. Click Next, if you want to use the default
path or click Browse to select another one.
Follow the on-screen instructions.
5. Once installed, configure the Time Synchronization program.
Select Start > Control Panel > NeoClock Time Synchronization.
Make the following settings in the configuration menu:
Language: German
Port: COM x (interface used)
Synchronization: Select Automatic
To be carried out by authorized personnel only!
NOTICE!
Only the NeoClock DCF 77 radio clock may be used.
1 Video system
2COM x
3 Radio clock connecting
cable
4 DCF 77
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 157 158

Comments to this Manuals

No comments