Bosch DiBos Micro Installation Guide download pdf (Page 138)

138 en | Connections DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

Time lag: Select 0 (hours) and Daylight saving time

License: Enter serial number and activation code (please note these entries are case

sensitive) and confirm with OK.

– Click Save.

– Click Yes in the information window to start the Time Synchronization service.

Note:

A timer appears in the Windows XP task bar (at the bottom edge of the screen). This

confirms that the Time Synchronization program has started. The color of the clock

depends on the receiver status.

Yellow: Program starting (takes up to three minutes!)

Red: No synchronization or installation error

Green: Synchronization of system clock with receiver is OK.

6. Exit the NeoClock Time Server service as follows:

– Select Start -> Control Panel -> Administrative Tools -> Services.

–Double-click NeoClock Time Server and click Exit under Service Status (General

tab) to exit it.

– Deactivate the service by selecting Deactivated as the Start type.

–Confirm with OK and close the Services dialog box and the Control Panel.

7. Reboot the PC.

8. The NeoClock Time Server program must not be configured; instead, TARDIS should be

used. (Program used to synchronize video systems in a network; can be requested from

the video system manufacturer's video product service).

9. To position the clock, use the NeoClock XP operating manual (available on the CD as a

PDF file).

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 138