Bosch DiBos Micro Installation Guide download pdf (Page 139)

DiBos/DiBos Micro Connections | en 139

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

9.9 Connecting a Modem/ISDN Card (for Incoming Connections)

Administrator rights are necessary for the following steps.

Modem selection:

– Both internal PCI modems and modems connected via serial port (exception: DSL

modems) or USB can be used if supported by Windows XP.

– The V.90 and V.34 protocols must be supported.

– The country-specific approval regulations must be observed (particularly regarding

operation in a telephone network, radio interference suppression, electrical safety and

fire protection).

– Compatible with the properties of the national telephone network.

– The characteristics of company telephone systems must be taken into account (e.g. call-

connected recognition disabling if necessary, tone/pulse dialing).

Modem installation

Install the modem according to the manufacturer's instructions provided. Many modem types

are recognized automatically under Windows® XP. However, take into account any special

features of the installation (example: If the modem does not recognize the call connected

signal of a telephone system, the option Wait for call connect before dialing must be

deactivated).

For modem: Reducing timeout values for outgoing connections

1. From the Windows® XP desktop, select Start > Control Panel.

2. From the Control Panel folder, select the Phone and Modem Options icon.

3. In the Phone and Modem Options dialog box, click the Modems tab.

4. Select the installed modem in the list field and click the Properties button.

5. In the dialog box, click Properties of .. on the Extended tab and then click the Edit

standard settings... button.

6. On the General page, under Cancel dialing procedure after .. seconds, change the value

from 60 to 15.

7. Confirm the open dialog boxes with OK.

For Modem and ISDN: Enabling dial-in

(if incoming calls are to be accepted)

1. From the Windows® XP desktop, select Start > Control Panel.

2. From the Control Panel folder, select the Network Connections icon.

3. In the Network Connections folder, under Network Tasks, click the Create new

connection icon.

4. In the New Connection Wizard dialog box, click the Next button.

5. On the Network Connection Type wizard page, select the option Set up an advanced

connection and click the Next

button.

6. On the Advanced Connection Options wizard page, select the Accept incoming

connections option and click Next.

7. On the Devices for Incoming Connections wizard page, select the previously installed

modem or ISDN card under Connection Devices. Place a checkmark next to this entry

and click Next.

8. On the Incoming VPN Connection wizard page, activate the Do not allow virtual private

connections option and click the Next button.

9. On the User Authorizations wizard page, click Next.

To be carried out by authorized personnel only!

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 157 158

Comments to this Manuals

No comments

Bosch DiBos Micro Installation Guide Page 139

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Bosch DiBos Micro