Bosch DiBos Micro Installation Guide download pdf (Page 23)

DiBos/DiBos Micro Device Connections | en 23

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

3.1.3 Grabber Card for DiBos

Looped through inputs may not be terminated. When a grabber card is retrofitted, the grabber

identification (grabber 1, grabber 2 etc.) must be set.

1 Grabber identification:

The setting for grabbers 1 - 5 is printed on the PCB.

0 = Grabber 1

1 = Grabber 2

2 = Grabber 3

3 = Grabber 4

4 = Grabber 5

2 Loopthrough cable plug

3 Termination when loopthrough cable is used:

1 = Switch position left: input terminated (position when

delivered)

2 = Switch position right: open, not terminated

3 = Topmost switch: for camera input 1 etc.

Note:

The positions relate to the illustration above.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 23