Bosch DiBos Micro Installation Guide download pdf (Page 49)

DiBos/DiBos Micro Default Configuration | en 49

Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09

6.2.3 Specifying Monitoring Zone for Motion Cameras

Video and audio connections menu > Camera section > Edit button

Make the settings for each camera as required.

1 Motion Click the tab. The entire image content inside the blue frame

is initially sensitive, i.e. motion is monitored.

2 Activate Select the check box to activate the motion sensor.

3 Within the blue frame

(image window)

Displays the current live image and the area being monitored.

The image is updated every second.

Left-click or hold the

left mouse button

down and drag an area

A plus sign appears beside the mouse cursor to show that the

selected area is sensitive and will be assessed during motion

detection. Sensitive areas are shown shaded in yellow.

Right-click or hold the

right mouse button

down and drag an area

A minus sign appears beside the mouse cursor to show that

the selected area is not sensitive and will not be assessed

during motion detection. Non-sensitive areas are shown

unshaded.

4 Sensitivity Change the sensitivity when the results of motion detection

are not satisfactory.

high The sensitivity increases i.e. to trigger an alarm, smaller

changes in the edges, the brightness and the motion are

needed.

low The sensitivity decreases i.e. to trigger an alarm, larger

changes in the edges, the brightness and the motion are

needed.

5 Grid - Show A grid is shown in the image when the check box is activated.

The sizes of the drawn-in sensitive/insensitive areas are

oriented around the grid.

6 OK The entries are saved.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 49