Bosch DiBos Micro Installation Guide Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
58 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
6.2.9 Configuring MPEG4 IP Cameras
Video and audio connections menu > MPEG4 IP cameras section > Edit button
In this menu, only MPEG4 units from Bosch from which MPEG4 images can be called up can
be configured (e.g. VideoJet, VIP). Depending on the model, a maximum of 32 network
devices (JPEG cameras and MPEG4 devices from Bosch) can be connected.
1 Camera name
Device type: Select the MPEG4 device you require.
IP address: Enter the address (URL) of the MPEG4 device.
Channel: Select the channel of the MPEG4 device.
Name: Enter the name of the MPEG4 device. The choice of name is
up to you.
Live stream: Select the stream of the MPEG4 device (Stream 1 or Stream
2) to be used for viewing live images.
Motion detection Activates the motion detection of the MPEG4 device in DiBos.
Note:
Motion detection must also be activated on the MPEG4
device.
–Under Alarm processing, the name of the MPEG4 device
appears in the Trigger section. The trigger can, for
example, be selected so that it controls recording. To do
so, you must select the job you require.
Reference image check Activates the reference image check of the MPEG4 device in
DiBos.
Note:
The reference image check must also be activated on the
MPEG4 device.
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 157 158

Comments to this Manuals

No comments