Bosch DiBos Micro Installation Guide Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
DiBos/DiBos Micro Safety Notes | en 7
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
1Safety Notes
The following safety notes must be observed:
1. Read, follow and retain instructions
All safety and operating instructions must be read and followed before installing the
device. Retain instructions for future reference.
2. Observe warnings
Observe all warnings on the device and in the operating manual.
3. Add-on devices
Do not use add-on devices that are not recommended by the product manufacturer as
these may cause hazards.
4. Installation notes
Do not place the device on an unstable mounting, tripod or similar. The device may fall to
the ground and seriously injure the user or be damaged itself. Only use accessories that
have been recommended by the manufacturer or are delivered with the device. Fit the
device according to the manufacturer's instructions. Exercise extreme caution when
transporting the device on a trolley. Abrupt stopping, extreme force effects and uneven
surfaces may cause the device and the trolley to tip over.
5. Cleaning
Unplug the device from the mains power supply before cleaning. Follow all instructions
for the device. Normally, cleaning can be carried out with a damp cloth. Do not use liquid
cleaners or cleaners in spray cans.
6. Service
Do not attempt to service the device yourself. You may be exposed to high electrical
voltages or other hazards if you open or remove covers. Servicing must be carried out by
qualified maintenance personnel.
7. Damage requiring service.
Unplug the device from the mains power supply and arrange for the device to be serviced
by qualified personnel if:
The mains cable or mains plug is damaged.
Liquids or foreign bodies are present in the device.
The device has come into contact with water and/or has been exposed to extreme
environmental conditions (e.g. rain, snow etc.).
If the device does not work properly in spite of following the operating instructions,
make changes only to those operating elements that are described in the operating
instructions. Incorrect changes to other operating elements may cause damage
requiring extensive repair work to be carried out by qualified service personnel.
The device has fallen to the ground or the housing has been damaged.
A noticeable change in the performance of the device has occurred. In this case, the
device must be serviced.
8. Spare parts
If spare parts are required, service personnel must use spare parts that are
recommended by the manufacturer or correspond to the original parts. Using the wrong
spare parts may result in fire, electric shock or other hazards.
9. Safety test
When servicing or repair is complete, ask service personnel to carry out a safety test to
ensure that the device is working correctly.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 157 158

Comments to this Manuals

No comments