Bosch DiBos Micro Installation Guide download pdf (Page 86)

86 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.5.8 Configuring POS Inputs

Inputs and outputs menu > POS inputs tab

A POSserver (POS= point of sale) is connected via the IP network (LAN). To do this, the

DiBos IP address must be configured in the POS server. A maximum of 64 virtual inputs are

available in DiBos. When activating defined transactions at the POS points, an image is

automatically recorded.

1 POS inputs Click the tab.

2 Port number: Enter the DiBos port number to which the IP server

sends the data.

Note:

The port number in the DiBos configuration must

match the port number that has been entered in the

POS server.

3 Data structure: Shows the structure of the data stream that is sent to

DiBos by the POS server. It is possible to have a

maximum of 10 data fields as distinguishing factors. A

maximum of 100 characters are possible per data

field.

4 Edit Click the button. A dialog box opens in which you can

configure the type of data field and the corresponding

start and end position in the data stream.

Note:

Mark in advance the rows to be processed under

Data structure.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 86