Bosch DiBos Micro Installation Guide Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
92 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
6 Dome camera control A job can control a maximum of 4 dome cameras and pan/tilt
cameras.
Activate the check box of the line concerned. Then select the
camera to be controlled in the list field and a preposition or a
command.
Note:
Only different dome cameras and pan/tilt cameras can be
controlled.
The saved positions and commands must be configured
under Video and audio connections Add/Modify
camera Dome settings.
7 Monitor control Once a job has been triggered, an alarm sequence can be
displayed on monitor A/monitor B.
Monitor A / Monitor B Activate the check box. The cameras are displayed on the
monitor.
Edit Click the button. A dialog box opens. Select the cameras and
the display duration.
8 Informing via E-mail Once a job has been triggered, a notification e-mail can be
sent.
Activate Activates the e-mail notification.
Recipient: Enter the e-mail address of the recipient.
Note:
Where there are several e-mail addresses, these must be
separated by semi-colons.
Configure E-mail The e-mail server setup opens after the button is clicked.
During setup, enter data on the transmitter name, e-mail
address, user name etc.
9 Copy settings to other
time periods...
Copies the selected job with all the settings it contains to
other time periods.
Select a job and click the button. A dialog box opens where
you can select the time periods.
10 Save The entries are saved.
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 157 158

Comments to this Manuals

No comments