Bosch DiBos Micro Installation Guide download pdf (Page 94)

94 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.7 Configuring Remote Stations

Remote stations menu

In this dialog box, you determine the remote stations for your own workstation (local

computer) so that you can connect to these remote stations later in the configuration

procedure.

1 Local settings Edit the following settings for your own workstation.

Modem/ISDN: Select the modem or ISDN card.

Note:

To configure a modem connection, an RAS-capable modem

must be connected and an RAS service installed.

Number of B channels Enter the number of B channels.

Accept incoming calls

(for standard users)

Incoming calls may be accepted by standard users.

Password... Enter the password that allows remote stations to be dialed

into.

System control... Under Windows XP, opens Network Connections in the

Control Panel.

Note:

Here you can configure your own IP address or make firewall

settings, for example.

Info If no RAS-capable modem is connected or no RAS service is

installed, a notes icon and a button with additional

information appears.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 157 158

No comments

Bosch DiBos Micro Installation Guide Page 94