Bosch EHP 6.5 AA User Manual download pdf (Page 8)

GB-6

1

Press the MODE button to select the

operation mode.

AUTO HEAT COOL DRY

2

Press the ON/OFF button to start

operation.

• The red OPERATION lamp ( ) on the unit

will light.

3

Press the THERMOSTAT button to set

the desired temperature.

AUTO/DRY MODE

• The temperature can be changed up to 2°C

above or below the temperature automatically

determined by the air conditioner.

COOL/HEAT MODE

• The temperature can be set within the range

of 18 to 32°C.

4

Press the FAN button to set the desired

fan speed.

AUTO SOFT LOW HIGH

• In the DRY mode, the fan speed is preset to

AUTO and cannot be changed.

5

To turn off the unit, press the ON/OFF

button again.

• The red OPERATION lamp ( ) on the unit

will turn off.

BASIC OPERATION

(Example: 1°C higher)

(Example: 2°C lower)

2

5

3

1

4

TIPS ABOUT AUTO MODE

In the AUTO mode, the temperature setting and

mode are automatically selected according to

the room temperature and outdoor temperature

when the unit is turned on.

• During operation, if the outdoor temperature

changes, the temperature settings will auto-

matically slide as shown in the chart.

Modes and Temperature Settings

The gures in ( ) are temperature settings

EHP6.5_AA_multi_TINSEA825JBRZ.indd 6 2013/7/6 13:35:33

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 83 84

Comments to this Manuals

No comments