Bosch SM070 Specifications download pdf (Page 4)

4 | Safety Warnings SM Series Heat Pump

SM Series Heat Pump6 720 220 406 (2013/9) Subject to change without prior notice

SAFETY WARNINGS STANDARD PACKAGE

Figure # 2

[1] SM Series Water-to-Air Heat Pump

[2] Corner Caps Package

[3] Installation and Operation Manual

[4] Hanging Bracket kit (HZ unit only)

Installation and servicing of this equipment

can be hazardous due to system pressure

and electrical components. Only trained

and qualified personnel should install,

repair, or service the equipment.

Before performing service or maintenance

operations on the system, turn off main

power to the unit. Electrical shock could

cause personal injury or death.

When working on equipment, always

observe precautions described in the

literature, tags, and labels attached to the

unit. Follow all safety codes. Wear safety

glasses and work gloves. Use a quenching

cloth for brazing, and place a fire

extinguisher close to the work area.

To avoid the release of refrigerant into the

atmosphere, the refrigerant circuit of this

unit must be serviced only by technicians

who meet local, state, and federal

proficiency requirements.

All refrigerant discharged from this unit

must be recovered WITHOUT EXCEPTION.

Technicians must follow industry accepted

guidelines and all local, state, and federal

statutes for the recovery and disposal of

refrigerants. If a compressor is removed

from this unit, refrigerant circuit oil will

remain in the compressor. To avoid leakage

of compressor oil, refrigerant lines of the

compressor must be sealed after it is

removed.

To avoid equipment damage, DO NOT use

these units as a source of heating or cooling

during the construction process. Doing so

may affect the unit’s warranty. The

mechanical components and filters will

quickly become clogged with construction

dirt and debris, which may cause system

damage.

1

2

3

4

1 2 3 4 5 6 7 8 9 ... 99 100

Comments to this Manuals

No comments