WORCESTER GREENSTORE6kW, 7kW, 9kW & 11kW CombiHEAT PUMPUSER MANUALGB/IEGB/IE
10 Control panelAll settings are made on the control panel. It also displays heat production statistics and information about different alarms. When y
11Control panel Rego 637W K1 060822 16:08:15 TuHeat Info MenuMenu dialThe menu dial is used to scroll through the menu display windows. T
12Basic functions - Customer level 1The menu display is standard on all heat pumps.==Temp. fi ne-tunePage 16The menu display is only shown on the heat
13The heat pump is in standby mode.The heat pump is producing hot water. The present temperature and temperature at which the heat pump will stop are
14 In cold weather (below +5ºC): If the indoor temperature, when it is colder than +5ºC outdoors, is not satisfac-tory, the slope of the heat curve s
15Basic functions - Customer level 1Fine-tune the heat curveThe heat curve can also be fi ne-tuned. Fine-tuning means that the heat curve is offset in
16Set the required room temperatureIf a room sensor is connected to the heat pump the temperature of the room can be set using the Room temperature me
17Basic functions - Customer level 1Heating and hot water settings Move to the temperature settings for heating on Customer level 1 as shown:1. Press
18All menus relating to temperature sensorsAll menus relating to temperature sensorsAll the menus associated with the heat pump temperature sensors ar
19Extra functions - Customer level 2 Extra functions (Customer level 2)The section Basic functions (Customer level 1) contains the functions which are
2Table of ContentsTable of contents BUILDING REGULATIONS ...
20Temperature settingsProceed as follows to access the temperature settings for the heating on Customer level 2:1. Press and hold the Heat button unt
21Set extra heat curve with mixing valveIf the system comprises underfl oor heating combined with radiators, an extra heat curve with the mixing valve
22 Timer controlThe menu for opening timer controls are as follows:1. Press the Heat button until Access = CUSTOMER2 is displayed.2. Press the Menu
235. Turn the menu dial until the value 22:00 is displayed.6. Press the right-hand arrow twice (->) to move the cursor two steps to the right. 7.
243. Turn the menu dial clockwise until the menu Op. time readings on HP and add. heat (menu 7) is displayed.4. Press the Select button and scroll t
25Alarms given by the heat pumpThe menu provides information about the alarm type and when it occurred. If there is an asterisk (*) in the menu window
Tranås Tryck & Media CONTACT INFORMATIONWORCESTER, BOSCH GROUP:TECHNICAL: 08705 266241SERVICE: 08457 256206SPARES: 01905 752571LITERATURE:
3User manual for the Worcester Greenstore Combi heat pumpsWorcester, 09.01.07Part number: 8-716-113-341 Issue: aCopyright © 2007 BUILDING REGULATIONST
4NoteIt is important as the user that you read through these instructions. Under no circumstances should the user make settings that are designed for
5How the heat pump worksThe heat pump has been manufactured for easy and reliable use as well as to provide your house with inexpensive and environmen
6 Heat transfer fl uid in. The heat pump collects stored solar energy. It contains a heat transfer fl uid which is a solution of water and glycol. This
7 Component parts of the heat pumpComponent parts of the heat pumpGreenstore Combi Reset buttonPress in the button if the overheat protector on the el
8Rego 637W Control unitThe control unit is the brains of the heat pump. It makes sure the heat pump gives the best energy savings. The control unit c
9The control unit’s two methods to control the heat pumpThe control unit uses two different methods to control the heat pump. These two methods are A
Comments to this Manuals