Bosch WORCESTER GREENSTORE User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
20
Temperature settings
Proceed as follows to access the temperature settings for the heating on Customer
level 2:
1. Press and hold the Heat button until Access = CUSTOMER2 is displayed.
2. Press the Menu button.
3. Press the Select button and scroll through the menus using the menu dial.
Adapting the heat curve
The heat curve can be adjusted in increments of 5°C. For example, you can make a
hump in the curve at 0ºC. Navigate to menu 1.3, press Select and turn the menu dial
until 0°C is displayed in the upper left part of the menu. Press Adjust and turn the
dial to increase or decrease the return temperature. The change must not exceed
1 - 2°C. Press Save and wait at least 24 hours prior to any further adjustment.
The purpose of breaking the curve is to be able to infl uence the heat pump’s heat
production at extra sensitive outdoor temperatures.
Room sensor infl uence
The menu is only shown for heat pumps which have a room sensor installed. This
menu is used to set how much the room sensor should infl uence the heat curve.
A higher value will have a greater effect. The room sensor only fi ne-tunes the heat
curve. Consequently, it is important that the basic setting of the heat curve’s slope
and fi ne-tuning are correct.
Holiday mode
The menu is only shown for heat pumps which have a room sensor installed. The
holiday function gives the possibility to choose a number of days when the room
temperature will be lowered to 15ºC (the temperature is not adjustable). When the
days have passed the heat pump returns to the normal heating setting. Hot water
production is not affected by the holiday function.
Remote control
The menu has no function.
Summer disconnection
This function disables the heating when the outdoor temperature rises above the
set value.
Extra functions - Customer level 2
Main menu
Indoor temperature
settings 1
Return Select
Temperature settings
Heat curve
adjust. (break) 1.3
Return Select
Temperature settings
Setting of room
sensor in . 1.11
Return Select
Temperature settings
Setting of holiday
function 1.12
Return Select
Temperature settings
Remote control
temperature 1.13
Return Select
Temperature settings
Setting of summer
disconnection 1.14
Return Select
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments