Bosch D1265 User's Guide download pdf (Page 17)

D1265 | User's Guide | Part II: System Commands

Bosch Security Systems | 9/10 | F01U169131-02 17

Master Arming all Areas

If you prefer, you might use the Master Arm

command in the function list. Press the Menu button

to access the function list configured in the keypad.

1. Ensure your keypad shows idle text.

2. Press the Menu button to enter the function list,

then press the Next button repeatedly until you

reach the Master Arm button.

3. Press the button.

4. The display might prompt you to enter your

passcode.

The passcode is shown as asterisks (*) when

entered.

5. If more than one area is configured, the system

gives the option to arm all areas with Master

Arm All. To arm all areas proceed to Step 9.

6. To arm a selected area, press Next until the

desired area appears (Area name text along

with Arm Area #).

7. Then press Arm.

8. The next available area appears with the option

to arm it.

Every time the Next, Previous or Arm buttons

are pressed, the display scrolls to the next

unarmed area.

9. To arm all available areas, press the Arm

button when the display reads Master Arm All.

10. The display changes to show that all areas are

arming.

The display shows Exit Now! # (# = exit delay

time remaining).

After the exit delay time expires, the display

changes to idle armed text.

11. To disarm your security system, enter your

personal passcode and press ENTER.

12. The display changes to show that all the areas

are disarmed.

The display returns to idle text.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Bosch D1265 User's Guide Page 17