Bosch D1265 User's Guide download pdf (Page 25)

D1265 | User's Guide | Part II: System Commands

Bosch Security Systems | 9/10 | F01U169131-02 25

Using CMD 9

1. Ensure your keypad shows idle text.

2. Press the CMD button. The display shows

*System Command*.

3. Press the 9 button.

If you prefer, you might use the function

list in place of Steps 2 and 3 to initiate

this function.

Press the Menu button to enter the

function list.

Press the Next button repeatedly.

When you reach the User Command 9

button, press it.

4. Your Command 9 special alert has been

programmed to:

 notify your alarm company

 ring a bell on your premises

 display at your keypad

Description:

_________________________________________

Bypass a Point (CMD + 0)

Description

Bypass points that you do not want included in the

system. Points that are not included in the system do

not detect intruders and cannot send any reports. You

can bypass points when an area is disarmed. Bypassing

a point reduces the level of security and should be

used with discretion. Points remain bypassed until you

unbypass them, or some points might return when the

area is disarmed (refer to Unbypass a Point (CMD + 0 +

0) on page 27).

You could use CMD 0 to leave a window open over

night without initiating an alarm.

Using Bypass a Point

1. Ensure your keypad shows idle text.

2. Press the CMD button. The display shows

*System Command*.

3. Press the 0 button.

If you prefer, you might use the function

list in place of Steps 2 and 3 to initiate

this function.

Press the Menu button to enter the

function list.

Press the Next button repeatedly.

When you reach the bypass a Point

button, press it.

4. You might be prompted for your passcode. It

appears on the display as asterisks (*).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Bosch D1265 User's Guide Page 25

Comments to this Manuals

Related products and manuals for Numeric keypads Bosch D1265