Bosch D1265 User's Guide download pdf (Page 8)

D1265 | User's Guide | Part I: Security System Basics

8 Bosch Security Systems, Inc. | 9/10 | F01U169131-02

Fire Alarms

Fire alarms are the highest priority events. When a fire

point activates, your keypad emits a pulsating high-

pitched fire tone. Evacuate all occupants and

investigate for smoke or fire. Ensure that all occupants

know the difference between the burglary tone and the

fire tone. The tone sounds for the time set by your

security company.

The keypad display shows the point text of the first

point that went into fire alarm and shows the message

Enter Passcode and ENTER key to silence.

Silencing Fire Alarms

Entering a personal passcode with the proper authority

level silences a fire alarm and disarms the system if it

was armed.

The system now shows *Alarm Silenced* and then

the number of points in alarm (# FIRE ALARMS) and

then the area text appears (AREA 1 NAME TEXT)

followed by the custom text of all the points in alarm

(for example, SMOKE DETECTOR), in the order of

occurrence.

If there is more than one point causing an alarm, the

display shows each point for 3 sec before showing the

next one.

When the last alarm is shown, the next display is the

first alarm.

Your system might be programmed so that you cannot

silence some fire alarms until the fire event clears.

The *Alarm Silenced* message continues to alternate

with idle text as a reminder that it is still possible to

view the text of the points in alarm by using the View

Alarm Memory function (refer to View Alarm Memory

(CMD + 4 + 0) on page 20) for more information.

To clear the event memory and remove the *Alarm

Silenced* message from the display, press the Clear

Display button.

The display shows the instructions for clearing the

message. Enter a valid passcode and press the Clear

button.

If a fire trouble still exists, the *Alarm Silenced*

display will not be cleared. To remove this display, the

fire point(s) must be returned to normal.

If you have not cleared the *Alarm Silenced* display

and wish to review cleared events, use CMD 40.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comments to this Manuals

No comments

Bosch D1265 User's Guide Page 8

Comments to this Manuals

Related products and manuals for Numeric keypads Bosch D1265