AMAX panel 2000 / AMAX panel 2000 EN FAQs | en 27
Robert Bosch Engineering and Business Solutions LimitedQuick Reference Guide F.01U.241.128 | V2 | 2011.11
After an auxiliary
power source short
circuit, system cannot
be restored.
– Restart the AC power supply and battery
After changing the
battery, a battery error
still shows.
– When the system is armed or every 4 hours, it checks the
battery, so it may be necessary to wait before the battery error
is cleared
– New batteries may require charging before they reach 12 V
When there is an
alarm, the system does
not dial.
– Check whether the communications were programmed to
disable the dial function (telephone number and
communication format must be programmed)
Cannot remotely alarm. – Check whether this function has been programmed (address
152 cannot be 0)
Central software
cannot be remotely
programmed and
controlled.
– Check whether this function has been programmed (address
152 and 153 cannot be 0)
Using PSTN/personal
telephone alarm the
communication is
occasionally incorrect.
– The telephone network uses an extension system; it is
necessary to add a delayed dial
– The telephone network also supports ADSL; system must be
connected after the ADSL wave filter
Comments to this Manuals