Bosch VideoJet 8008 User Manual download pdf (Page 114)

Installation and Operating Manual | VideoJet 8008

EN | 114

Operation Bosch Security Systems | 2005-06 | V2.0

Connecting with a terminal program

Various requirements must be met in order to operate using a terminal program

(see page 23).

– Start the terminal program and enter the command i in the main menu to

switch to the IP menu.

– Enter the command r in the IP menu to change the remote IP address, then

enter the IP address of the device to connect to.

– Enter the command a in the IP menu to activate the automatic connection set

up.

Connecting with a web browser

Various requirements must be met in order to operate using a Web program

(see page 27).

Note

Transmitter and receiver must be located in the same subnet to establish

a hardware connection with a web browser (see pages 52 and 89).

– Use the web browser to connect to the receiver. Its home page will be

displayed.

– Under Video sources on the page CONNECTIONS, select the

VideoJet 8008. A JPEG snapshot of the video source selected will be

displayed on the page.

– Set the video input you want the images to come from.

– Click MPEG-4 connection to begin displaying the video images on the

connected monitor.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 114