Bosch VideoJet 8008 User Manual download pdf (Page 51)

VideoJet 8008 | Installation and Operating Manual

EN | 51

Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser

Destination IP address:

For each number, enter the corresponding IP address for the desired remote

location.

Destination password:

If the remote location is password protected, enter the password here.

Auto-connect:

Select On if an active connection should be re-established automatically to one

of the previously specified IP addresses after each restart, connection

breakdown or network failure.

Note

For automatic connections, always Stream 2 is transmitted. Take this into

account when assigning the profile (see page 32).

Default camera:

Here you can select the camera whose image will automatically be displayed

first to the receiver after the alarm connection has been established. Depending

on the system configuration, the receiver can then also select the other

cameras.

Note

The numbering corresponds to the labeling of the video inputs on the rear

panel of the unit.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 51