Bosch VideoJet 8008 User Manual download pdf (Page 64)

Installation and Operating Manual | VideoJet 8008

EN | 64

Configuration using a Web Browser Bosch Security Systems | 2005-06 | V2.0

Note

The settings on this page apply to all camera inputs.

Camera name stamping:

This field sets the position of the camera name overlay. It can be displayed at

the Top, at the Bottom or at a position of your choice using the option Custom.

Or it can be set to Off if no overlay of this information is to be shown.

Time stamping:

This field sets the position of the time and date overlay. It can be displayed at

the Top or at the Bottom of the image or you can define a position yourself via

the HyperTerminal and activate it choosing the option Custom. Or it can be set

to Off if no overlay of this information is to be shown.

Alarm mode stamping:

Choose On if a text message should be overlaid in the event of an alarm. It can

be displayed at a position of your choice using the option Custom. Or it can be

set to Off if no overlay of this information is to be shown.

– Select the desired position from the lists.

– If you have selected the option Custom, additional fields are displayed to

specify the exact position (Position (XY):).

– In the Position (XY): fields enter the values for the desired position.

Displayed alarm message:

Enter the message to be displayed for an alarm. It can contain up to 31

characters.

Video watermarking:

Choose On if the video images transmitted are to be "watermarked". After

activation, all images will be marked with a small green rectangle. A red

rectangle indicates that the sequence (live or saved) has been manipulated.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 64