Bosch VideoJet 8008 User Manual Page 69

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 68
VideoJet 8008 | Installation and Operating Manual
EN | 69
Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser
Target data rate:
To optimize utilization of the bandwidth in your network, you can limit the data
rate for the VideoJet 8008. The target data rate should be set according to the
desired picture quality for typical scenes with no excessive motion.
For complex images or frequent changes of image content due to frequent
movements, this limit can temporarily be exceeded as far as the value you enter
in the Max. data rate: field.
Max. data rate:
This maximum data rate is not exceeded under any circumstances. Depending
on the video quality settings for the I- and P-frames this can result in the skipping
of individual images.
The value entered here should be at least 10% higher than the value entered in
the Target data rate field.
P-frame video quality:
This setting allows you to adjust the image quality of the P-frames depending on
the movement within the image. The Auto option automatically adjusts to the
optimum relationship between movement and image definition (focus). Manual
allows you to set a value between 4 and 31 on a slide bar. The value 4
represents the best quality with, if necessary, a lower frame refresh rate
depending on the settings for the maximum data rate. A value of 31 results in a
very high refresh rate and lower image quality.
I-frame video quality:
This setting allows you to adjust the image quality of the I-frames. The Auto
option automatically adjusts the quality of the P-frame video quality. Manual
allows you to set a value between 4 and 31 on a slide bar. The value 4
represents the best quality with, if necessary, a lower frame refresh rate
depending on the settings for the maximum data rate. A value of 31 results in a
very high refresh rate and lower image quality.
I-frame distance:
This parameter determines the number of inter-coded frames between two
I-frames.
Page view 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 135 136

Comments to this Manuals

No comments