VideoJet 8008 | Installation and Operating Manual
EN | 7
Bosch Security Systems | 2005-06 | V2.0 Safety information
Safety information 2
Electric shock hazard
] Never attempt to connect the unit to any power network other than the type
for which it was intended.
] Never open the housing!
] If a fault occurs, disconnect the unit from the mains supply and from all other
devices.
] Install the unit only in dry, weather-protected areas.
] If safe operation of the unit cannot be ensured, remove it from service and
secure it to prevent unauthorized start-up. Safe operation is no longer
possible in the following cases:
– if there is visible damage to the unit or power cables,
– if the unit no longer works properly,
– if the unit has been exposed to rain or moisture,
– if foreign matter has infiltrated the unit,
– after long storage under adverse conditions or
– after exposure to extraordinary transport stress.
In such cases, have the unit checked by Bosch Security Systems.
Comments to this Manuals