Bosch VideoJet 8008 User Manual download pdf (Page 89)

VideoJet 8008 | Installation and Operating Manual

EN | 89

Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser

Network

The settings in this window are used to integrate the unit into an existing

network.

Warning!

Changes to the IP address, subnet mask or gateway address are

transferred to the unit by clicking Set. However, they only take effect after

the unit is restarted.

– Click Set after entering a new IP address.

– To do this, enter the old IP address followed by /reset (for instance

192.168.0.80/reset) in the address bar of your web browser. The

VideoJet 8008 will be restarted, after which it can only be accessed at the

new IP address.

IP address:

Enter the desired IP address for the VideoJet 8008 in this field. The IP address

must be valid for the network.

Subnet mask:

Enter the appropriate subnet mask for the set IP address here.

Gateway address:

If you want the unit to establish a connection to a remote location in a different

subnet, enter the IP address of the gateway here. Otherwise, this field can

remain empty (0.0.0.0).

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 89