Bosch VideoJet 8008 User Manual download pdf (Page 97)

VideoJet 8008 | Installation and Operating Manual

EN | 97

Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser

Firmware and configuration upload

Firmware update:

The VideoJet 8008 is designed in such a way that its functions and parameters

can be updated with firmware. To accomplish this, the current firmware package

is transferred to the unit via the selected network. The firmware will be installed

there automatically.

Thus a VideoJet 8008 can be serviced and updated remotely without requiring

a technician to make changes to the installation on site.

The current firmware can be obtained from your customer service center or from

the Bosch Security Systems download area.

Warning!

Before starting the firmware update, make sure that you have selected the

correct upload file! Uploading the wrong files can result in the unit no

longer being addressable, requiring it to be replaced.

Do not interrupt the firmware installation for any reason! Interruption may

lead to faulty coding of the Flash EPROM. This can result in the unit no

longer being addressable, requiring it to be replaced.

– First, save the update file to the hard disk.

– Enter the full path for the update file in the field or click Browse... to locate

and select the file.

– Click Upload to begin transmission to the unit. The progress bar allows you

to monitor the transfer.

The new firmware is unpacked and the Flash EPROM is reprogrammed. The

time remaining is shown by the message going to reset. Reconnecting in ...

seconds. After the upload is completed successfully, the unit will restart

automatically.

If the Fail LED flashes, the upload has failed and must be repeated. To perform

the upload, you must switch to a special page:

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 97