18 en | Connections EX65 Explosion-protected Illuminator
F.01U.162.949 | 1.0 | 2011.03 Instruction Manual Bosch Security Systems, Inc.
5.3 Making the Connections
Refer to the following illustration when making connections:
Figure 5.1 EX65 Cable Connection Terminators
1 Terminals for incoming power and telemetry cables
2 Internal illuminator use. DO NOT connect any cables to these terminals.
3 Power In (12–24 VDC/12–24 VAC)
4 Power In (12–24 VDC/12–24 VAC)
5 Telemetry (for remote illuminator control)
6 Telemetry (for remote illuminator control)
CAUTION!
Connections to the terminal block must be made to the terminals on the left side. Do not
make connections to the terminals on the right side of the block.
Comments to this Manuals