Bosch EX65 Instruction Manual download pdf (Page 23)

24 en | Maintenance EX65 Explosion-protected Illuminator

F.01U.162.949 | 1.0 | 2011.03 Instruction Manual Bosch Security Systems, Inc.

9 Maintenance

9.1 Repairs

The EX65 has some user replaceable parts, including the front and rear end caps and the

mounting cradle. These parts are available as spare parts, please contact your local service

center for information in obtaining these parts.

9.2 Transfer and Disposal

The unit should only be passed on together with this installation guide. The unit contains

environmentally hazardous materials that must be disposed of according to law. Defective or

superfluous devices and parts should be disposed of professionally or taken to your local

collection point for hazardous materials.

9.3 Replacement of the Mounting Cradle

1. Disconnect power from the EX65 and, optionally, remove all connections.

2. Using a 10 mm wrench or the supplied multi-use tool, remove the three (3) M6 bolts

holding the mounting cradle to the mounting surface.

3. Put the EX65 in a safe location.

4. Using a 7 mm wrench or the supplied multi-use tool, remove the seven (7) M4 bolts

holding the mounting cradle to the housing.

5. Install a new mounting cradle in reverse of installation and tighten the seven (7) M4 bolts

to 1.5 ft/lb (2.0 N/m).

6. Finish installation as described in Section 7 Mounting, page 21.

DANGER!

Disconnect power before servicing or disassembling the housing or unit. Never remove the

front or end caps unless power is disconnected from the EX65.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

No comments

Bosch EX65 Instruction Manual Page 23