Bosch EX65 Instruction Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 31
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
26 en | Glossary EX65 Explosion-protected Illuminator
F.01U.162.949 | 1.0 | 2011.03 Instruction Manual Bosch Security Systems, Inc.
Glossary
A
AES
Automatic Electronic Shutter (see Electronic iris).
Aperture
The size of the opening in the lens iris that controls the amount of light reaching the CCD
Sensor. The larger the F-number, the less light reaches the sensor. An increase of one F-stop,
halves the amount of light reaching the sensor.
Auto Level Control (ALC)
The adjustment of the video level to give the desired brightness level. This can be done
electronically or by means of an iris control.
Auto White Balance (AWB)
A feature that allows a color camera to automatically adjust its output color to give a natural
color, independent of the lighting used.
AutoBlack
A technique of boosting the video signal level to produce a full amplitude video signal, even
when the scene contrast is less than full range (glare, fog, mist, etc.).
AutoIris
The lens iris opening is automatically adjusted to allow the correct illumination of the camera
sensor. With a direct drive (DC) iris lens, the camera controls the aperture size. A video iris
lens has the control circuit in the lens itself.
Automatic Gain Control (AGC)
The electronics that regulate the gain or amplification of the video signal. AGC is used in low-
light conditions with the iris fully open.
B
Back Light Compensation (BLC)
Selectively amplifies parts of the image to compensate for large contrast differences when
only a portion of the image is brightly lit (e.g. a person in a sunlit doorway). See also Smart
BLC.
Backfocus
The distance between the image plane and the rear portion of the lens. Correct backfocus
adjustment ensures that the camera remains in focus under various conditions.
Bilinx
A communications protocol that allows remote control, configuration, and updates to be
performed over the video cable (Coax or Passive UTP).
Bilinx address
The address may be set locally using the Bilinx Configuration Tool for Imaging Devices
(CTFID).
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments