28 | English
1 619 P07 577 | (14.10.09) Bosch Power Tools
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
25.09.2009
Assembly
Mounting the Protective Devices
f Before any work on the machine itself, pull
the mains plug.
Note: After breakage of the grinding disc during
operation or damage to the holding fixtures on
the protection guard/power tool, the machine
must promptly be sent to an after-sales service
agent for maintenance (for addresses, see sec-
tion „After-sales Service and Customer Assist-
ance“.
Protection Guard for Grinding
Place the protection guard 8 on the spindle col-
lar. Adjust the position of the protection guard 8
to the requirements of the operation. Lock the
protection guard 8 tightening the locking screw
7 with an allen key 3.
f Adjust the protection guard 8 in such a man-
ner that sparking is prevented in the direc-
tion of the operator.
Note: The encoding keys on the protection
guard 8 ensure that only a protection guard that
fits the machine type can be mounted.
Protection Guard for Cutting
f For cutting metal, always work with the pro-
tection guard for cutting 13.
f For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 20.
The protection guard for cutting 13 is mounted
in the same manner as the protection guard for
grinding 8.
Auxiliary Handle
f Operate your machine only with the auxilia-
ry handle 5.
Screw the auxiliary handle 5 on the right or left
of the machine head depending on the working
method.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle reduc-
es the vibrations, making operation more com-
fortable and secure.
f Do not make any alterations to the auxiliary
handle.
Do not continue to use an auxiliary handle if it
is damaged.
Hand Guard
f For operations with the rubber sanding
plate 16 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 15.
The hand guard 15 is fastened with the auxiliary
handle 5.
Mounting the Grinding Tools
f Before any work on the machine itself, pull
the mains plug.
f Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
Clean the grinder spindle 6 and all parts to be
mounted.
For clamping and loosening the grinding tools,
lock the grinder spindle with the spindle lock
button 1.
f Actuate the spindle lock button only when
the grinder spindle is at a standstill. Other-
wise, the machine may become damaged.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-952-002.book Page 28 Wednesday, October 14, 2009 1:34 PM
(199 pages)
(6 pages)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals