Bosch GWS 6-100 (E) Specifications download pdf (Page 11)

English | 29

Bosch Power Tools 1 619 P08 849 | (12.3.10)

f Provide for sufficient dust extraction when

cutting stone.

The protection guard for cutting 14 is mounted

in the same manner as the protection guard for

grinding 7.

Cutting Guide with Dust Extraction Protection

Guard

The cutting guide with dust extraction protec-

tion guard 21 is mounted in the same manner as

the protection guard for grinding 7.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 5.

Screw the auxiliary handle 5 on the right or left

of the machine head depending on the working

method.

Hand Guard

f For operations with the rubber sanding

plate 17 or with the cup brush/wheel

brush/flap disc, always mount the hand

guard 16.

The hand guard 16 is fastened with the auxiliary

handle 5.

Mounting the Grinding Tools

f Before any work on the machine itself, pull

the mains plug.

f Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

Clean the grinder spindle 6 and all parts to be

mounted.

For clamping and loosening the grinding tools,

lock the grinder spindle with the spindle lock

button 1.

f Actuate the spindle lock button only when

the grinder spindle is at a standstill. Other-

wise, the machine may become damaged.

Grinding/Cutting Disc

Pay attention to the dimensions of the grinding

tools. The mounting hole diameter must fit the

mounting flange without play. Do not use reduc-

ers or adapters.

When using diamond cutting discs, pay atten-

tion that the direction-of-rotation arrow on the

diamond cutting disc and the direction of rota-

tion of the machine (see direction-of-rotation ar-

row on the machine head) agree.

See graphics page for the mounting sequence.

To fasten the grinding/cutting disc, screw on

the clamping nut 11 and tighten with the two-

pin spanner; see Section “Quick-clamping Nut”.

f After mounting the grinding tool and before

switching on, check that the grinding tool is

correctly mounted and that it can turn free-

ly. Make sure that the grinding tool does

not graze against the protection guard or

other parts.

Mounting flange for grinding

spindle M 14: An O-ring (plas-

tic part) is inserted in the

mounting flange 9 around the

centring collar. If the O-ring is

missing or is damaged, it must

in all cases be replaced (article

number 1 600 210 039) before

the mounting flange 9 is mounted.

Flap Disc

f For operations with the flap disc, always

mount the hand guard 16.

Rubber Sanding Plate

f For operations with the rubber sanding

plate 17, always mount the hand guard 16.

See graphics page for the mounting sequence.

Screw on the round nut 19 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 16.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end span-

ner.

OBJ_BUCH-161-005.book Page 29 Friday, March 12, 2010 9:17 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments