Bosch GWS 6-100 (E) Specifications download pdf (Page 4)

22 | English

1 619 P08 849 | (12.3.10) Bosch Power Tools

g) If devices are provided for the connec-

tion of dust extraction and collection fa-

cilities, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better

and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the

switch is dangerous and must be re-

paired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other condi-

tion that may affect the power tool’s op-

eration. If damaged, have the power tool

repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp

cutting edges are less likely to bind and

are easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these in-

structions, taking into account the work-

ing conditions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical

replacement parts. This will ensure that

the safety of the power tool is maintained.

Safety Warnings for Angle Grinder

Safety Warnings common for Grinding, Sand-

ing, Wire Brushing or Abrasive Cutting Off Op-

erations

f This power tool is intended to function as a

grinder, sander, wire brush or cut-off tool.

Read all safety warnings, instructions, illus-

trations and specifications provided with

this power tool. Failure to follow all instruc-

tions listed below may result in electric

shock, fire and/or serious injury.

f This power tool is not recommended for

polishing. Operations for which the power

tool was not designed may create a hazard

and cause personal injury.

f Do not use accessories which are not spe-

cifically designed and recommended by the

tool manufacturer. Just because the acces-

sory can be attached to your power tool, it

does not assure safe operation.

f The rated speed of the accessory must be at

least equal to the maximum speed marked

on the power tool. Accessories running fast-

er than their rated speed can break and fly

apart.

f The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded

or controlled.

f The arbor size of wheels, flanges, backing

pads or any other accessory must properly

fit the spindle of the power tool. Accesso-

ries with arbor holes that do not match the

mounting hardware of the power tool will run

out of balance, vibrate excessively and may

cause loss of control.

OBJ_BUCH-161-005.book Page 22 Friday, March 12, 2010 9:17 AM

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Bosch GWS 6-100 (E) Specifications Page 4

Comments to this Manuals

Related products and manuals for Straight grinders Bosch GWS 6-100 (E)