Bosch GAS 50 Professional Operations Instructions Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 215
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16 | English
1 609 929 K11 | (18.2.09) Bosch Power Tools
Technical Data
Assembly
f Before any work on the vacuum cleaner it-
self, pull the mains plug.
Mounting the Handle
The vacuum cleaner cart is designed in such a
manner, that the vacuum cleaner can be pushed
easier with the push handle 16. Always grasp
the push handle 16 with both hands when push-
ing the vac.
Insert the push handle 16 into the 2 openings of
the container 11. Push the clamps 15 through
the corresponding holes of the push handle 16
and then lock the clamps 15.
The casters are equipped with brakes 12. To ac-
tuate the castor brake 12 press the lever down-
wards.
Replacing/Inserting the Dust Bag
(see figure A)
Unlock the latches 13 and remove the vacu-
um lid 3.
Pull off the full dust bag 17 from the connec-
tion flange toward the rear. Close the open-
ing of the dust bag by folding down the lid.
Remove the closed dust bag from the vacu-
um cleaner.
Slide the new dust bag 17 over the connec-
tion flange of the vacuum cleaner. Make sure
that the full length of the dust bag 17 faces
against the inner wall of the container 11.
Reattach the vacuum lid 3.
–Lock the latches 13.
For dry vacuuming operation, a dust bag 17
should be inserted. When operating with a dust
bag 17, the folded filter 18 clogs slower, the vac-
uuming performance is kept up longer and the
disposal of dust becomes easier.
When materials not hazardous to one’s health or
materials with or without an exposition value of
1mg/m
3
according to dust category L (until
now application category U) are being vacu-
umed, it is possible to vacuum directly into the
container.
Wood vacuum cleaner GAS 50 M
Professional
Article number
0 601 988 1..
Rated power input
W 1200
Container volume
(gross)
l50
Net volume
l43
Dust bag contents
l21
Vacuum*
mbar 225
Airflow*
l/s 39
Suction capacity
W 316 (6 mbar)
Surface of folded filter
cm
2
8600
Dust category (BIA)
M
Weight according
to EPTA-Procedure
01/2003
kg 17.4
Protection class
/I
BIA test certificate
number
200220710/
1110
* measured at the blower
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your vacuum cleaner. The trade names of the individual
vacuum cleaners may vary.
OBJ_BUCH-877-001.book Page 16 Wednesday, February 18, 2009 11:21 AM
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 214 215

Comments to this Manuals

No comments