Bosch BC3200RA5 Service Manual download pdf (Page 10)

Guidance on installing the Bosch

32C condensing water heater

Siting the appliance

The Bosch 32C can be installed in both indoor and

outdoor applications, with the correct ﬂue accessories.

Outdoor installations require a vent cap to be installed

with the appliances (see page 14), and indoor

installations require Bosch PP ﬂuing (see page 14).

Avoid areas where corrosive or ﬂammable gases may be

present.

Flue exhaust should be considered when siting the

appliance as clearance regulations for both indoor and

outdoor installations exist (refer AS/NZS 5601)..

Wall and ceiling clearances

Clearances for ensuring repair/inspection space

The minimum clearances (shown below) should be

followed to ensure that sufﬁcient room is available for

servicing the appliance.

Air inlet

Internal installations of the Bosch 32C require adequate

ventilation as per AS/NZS5601. Ensure that the air inlet is

adequately sized and is in accordance with AS/NZS5601.

The air inlet needs to be open to the outside air from the

room or area in which the water heater is used.

Openings supplying indoor air.

Technical & Speciﬁcation Information – Bosch 32 Series Water Heaters

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

No comments

Bosch BC3200RA5 Service Manual Page 10