Bosch BC3200RA5 Service Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
CascadeFlow
Cascade
systems
System Application
Bosch cascaded continuous flow systems are designed
for applications where high flow rates are required
consistently throughout the day. Cascading the systems
allows higher flow rates than a single appliance can supply.
Intelligent system controls enable staging and rotating
which extends the lifetime of the appliances. Commonly
installed in sporting clubs, restaurants, commercial
kitchens, and laundries, cafes, pubs and hotels.
Available Options
3 NG or LPG
3 Bosch 32 high efficiency, or Bosch 32C appliances
available
3 50°C locked options (Bosch 32C options only)
3 Available in configurations of 2 to 6 appliances
How are they supplied?
3 Fully assembled and mounted on a cascade framework
3 Hot and cold lines pre-plumbed to each appliance
3 All water connections are insulated
3 Gas supply lines pre-plumbed to each appliance
3 All water and gas lines tested to AS/NZS standards
3 Supplied in modules of 2 or 3 cascaded appliances
3 When 4 or more appliances are required, the
appropriate combination of modules, connection kits
and controllers will be supplied
Included in the pack
3 Bosch 32 or 32C appliance
3 Cascade framework
3 Pipework and fittings
3 Quick connect cord and main controller (2 appliance
system), or system controller and cables (3 to 6
appliance systems)
What is required at installation?
As all pipework to the appliances has been sealed and tested,
only the following is required by the installing plumber
3 Connection of the two modules (if 4 to 6 appliance
options are required)
3 Installation of the floor mount kit (floor standing
applications only)
3 Connection to the main hot, cold and gas lines
3 Connection to electricity supply via the two modules
3 Connection and programming of the controller
3 Fit vent cap (outdoor applications) or flue (indoor
applications) as required
Product Features
3 Flexible modular design allowing easy pre-plumbed
installation
3 electronic staging and rotation system for extended
life of the system
3 No gas consumption when hot water is not in use
3 Consistent outlet temperature, even when the flow
rate varies
3 Flexible installation as both indoor and outdoor
installations are possible
3 Can be used in standard or recirculation installations
(additional pump and control system required)
3 Controller available for easy diagnostics
3 Shipped in a heavy duty wooden crate designed for
protection during shipping, and safe onsite craning
38
|
Technical & Specification Information – Bosch 32 Series Water Heaters
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comments to this Manuals

No comments