Bosch DANESMOOR UTILITY 32-50 Instruction Manual download pdf (Page 21)

BOILER INSTALLATION

1 Lift the top panel (A) upwards to

disengage the ball stud connections (B)

and remove.

2 Pull the upper front panel squarely

forwards to disengage the ball stud

connectors and remove from the control

box (G).

 Remove securing screws (C) from each

side.

 Slide control box (G) outwards to its full

extent.

3 Depress locking ears to unplug burner

lead (F) from cntrol box (G).

4 Sterling burner:

 Release burner retainers (O).

 Lift burner up to release blast tube (N)

from heat exchanger and store safely

away from the boiler.

4aRiello burner:

 Remove burner retainer nut (O).

 Lift burner up to release blast tube (N)

from heat exchanger and store safely

away from the boiler.

5 Release split pin (P) to remove the flue

thermostat (M) from the flue hood.

6 Release split pin (P).

 Carefully remove the CH Control

thermostat (Q), Automatic High Limit (T)

and Manual Reset thermostat (U) philes

from the heat exchanger thermostat

pocket.

7 Unscrew side panel (R) retaining screws

(S) from both sides.

 Slide both side panels together with the

top support bracket (L) and control box

(G) forwards to release the side panel

retaining lugs.

 Remove and store safely away from

the boiler.

NOTE: to enable the panels to stand

upright, reposition and secure

control box (G) to the side panels.

BOILER INSTALLATION

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR UTILITY 32/50 & 50/708 716

109 711B 07.2010

INSTALLATION

8 716 109 711 b 07.10 14/7/10 09:59 Page 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Comments to this Manuals

No comments

Bosch DANESMOOR UTILITY 32-50 Instruction Manual Page 21

Comments to this Manuals

Related products and manuals for Water heaters & boilers Bosch DANESMOOR UTILITY 32-50