Bosch DANESMOOR UTILITY 32-50 Instruction Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
OIL BURNER & PUMP
RIELLO RDB BURNERS
INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR UTILITY 32/50 & 50/708 716
109 711B 07.2010
25
INSTALLATION
CAUTION: ISOLATE THE OIL & WATER
MAINS SUPPLY BEFORE STARTING ANY
WORK AND OBSERVE ALL RELEVANT
SAFETY PRECAUTIONS.
OIL BURNER:
1. RIELLO RDB 3.2
2. RIELLO RDB 4.2
Remove the combustion head from the
burner by removing the two opposing
screws at the top of the combustion head.
Adjust the the combustion head setting (B)
so that it is correct for the relevant output
as shown in the table opposite.
To adjust the combustion head setting (B),
turn the adjustment bar (A) clockwise or
anti-clockwise to move the inner sleeve (C)
up and down the blast tube (D).
The correct setting is shown when the
relevant number on the scale (B) is in line
with the top of the blast tube (E).
The electrodes and nozzle are factory set
and there is no need to adjust them.
With the adjustment bar (A) in line with the
top of the burner (F) return the
combustion head and secure in place
with the two screws at the top of the blast
tube.
OIL PUMP:
Connecting the oil pump for a single pipe
system:
The pump is factory set for single pipe
operation with the flexible oil hose fitted.
Check connections before use.
Converting the oil pump for a double pipe
system:
1 Check the inlet hose connection.
RIELLO RDB:
Unscrew return plug (2).
Screw in by-pass screw (3).
2 Connect the flexible oil return hose
(not supplied) between the oil pump and
the return line connection, and tighten to
secure.
OIL BURNER & PUMP
RIELLO RDB BURNERS
RIELLO RDB 4.2 BURNER SETTINGSRIELLO RDB 3.2 BURNER SETTINGS
RIELLO RDB OIL PUMP
1
2
3
2
Combustion head setting (B)
Set at top of combustion head (E)
3
4
5
Combustion head setting (B)
Set at top of combustion head (E)
1
2
3
8 716 109 711 b 07.10 14/7/10 09:59 Page 25
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Comments to this Manuals

No comments