
/
/
Rev 0 (1/17/08)
/
6
Part # 2
Part # 2
--
--
Circulation Pump & Impeller (3)
Circulation Pump & Impeller (3)
CAUTION: Don’t turn dishwashers
upside-down for tank access. When
dishwashers are turned upside-down,
water can flow into the water fill assembly
diaphragm and cause water to not fill
properly.
To raise right side of tank for circulation pump access:
Tools needed: T20 Torx screwdriver and pliers.
1. Remove one T-20 Torx screw from both rear corners holding tank to base (1) -- removing screw
from both sides allows tank to be blocked upward.
2. Remove right toe kick bracket by removing T-20 Torx screw (2).
3. Remove T-20 Torx screws from front right bottom corner holding tank to base (3).
4. Remove right hinge cover (4a), release right door tension cord from hinge (4b) & remove ground
wire (4c).
5. Raise and block up tank as shown with strut onto base (5a), sliding a piece of wood or other solid
material between the tank and base to keep tank from falling back onto base (5b).
1
3
2
Screw
4a
5a
4b
5b
4c
702_58300000133621_ara_en_a
Comments to this Manuals