Bosch GDA 280 E Operations Instructions download pdf (Page 18)

18 | English

1 609 929 N92 | (12.11.08) Bosch Power Tools

To remove the sanding sheet 4, grasp it at one

of the tips and pull it off from the sanding plate

Sanding accessories, such as fleece pads/pol-

ishing cloth pads, are attached to the sanding

plate in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different

sanding sheets are available:

For reworking or polishing, especially of metal

and stone, use fleece/polishing cloth pad.

Depending on the desired surface quality of the

workpiece, different fleece types or polishing

cloth pads are to be used.

Replacing the Sanding Plate

(see figure C)

n Slide the SDS button for release of the sand-

ing plate 6 all the way to the right.

o Remove the sanding plate 5.

p Guide the sanding plate 5 from below

against the sanding plate holder and firmly

press them together.

q Slide the SDS button for release of the sand-

ing plate 6 all the way to the left.

If, e. g., the front tip of the sanding sheet is

worn, you can also remove the complete sand-

ing plate and reattach it turned by 120°.

Specialty Sanding Plates

You can replace the supplied sanding plate 5

with a specialty sanding plate, which is available

as an accessory.

The specialty sanding plate is attached in the

same manner as the one supplied.

Attach and remove the respective sanding

sheets in the same manner as when changing

original sanding sheets.

Pad Extender (see figure D)

With the pad extender 8 you can sand surfaces

that are difficult to access, such as sills on win-

dows, cabinets or doors.

Pad Extender, Narrow (see figure E)

With the narrow pad extender 10 you can sand

narrow openings, slots and passages.

Pad Extender, Narrow Rounded (see figure F)

The narrow rounded pad extender 11 allows you

to sand curved and hollow areas or surfaces that

are curved inward, such as on furniture, rails or

heating radiators.

Grain size

For the working of all

wooden materials

40—240

For coarse-sanding, e. g.

of rough, unplaned

beams and boards

coarse 40, 60

For face sanding and

planing small irregulari-

ties

medium 80, 100,

120

For finish and fine sand-

ing of hard woods

fine 180, 240

For the working of

paint/enamel coats or

primers and fillers

40—320

For sanding off paint coarse 40, 60

For sanding primer medium 80, 100,

120

For final sanding of prim-

ers before coating

fine 180,

240, 320

OBJ_BUCH-428-002.book Page 18 Wednesday, November 12, 2008 3:21 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 190 191

Comments to this Manuals

No comments

Bosch GDA 280 E Operations Instructions Page 18

Comments to this Manuals

Related products and manuals for Angle grinders Bosch GDA 280 E