Bosch AutoDome User Manual download pdf (Page 3)

AutoDome® 300 Series PTZ Camera System | 3

DVR, further enhancing AutoDome’s viewing and recording

flexibility. Hybrid operation allows simultaneous dome

control over the network and via biphase analog controllers.

MPEG-4 encoding

AutoDome’s IP Communications Module uses the latest

MPEG-4 compression technology to provide DVD-quality

4CIF video at frame rates up to 25/30 PAL/NTSC images per

second (IPS). The IP module also leverages bandwidth

throttling and multicasting capabilities to efficiently

manage bandwidth and storage requirements while

delivering the best possible image quality and resolution.

Tri-streaming video

Bosch’s innovative tri-streaming feature enables

AutoDomes equipped with the optional IP communications

module to generate two independent MPEG-4 streams and

a JPEG stream simultaneously. This feature allows you to

stream high-quality images for live viewing while recording

at a reduced frame rate, and at the same time, stream JPEG

images to a remote PDA device.

Unsurpassed reliability

AutoDome builds on Bosch’s 10-plus years of experience

designing and manufacturing dome camera systems. All

AutoDome pendant housings (indoor and outdoor) are

rated to provide IP 66 protection. Outdoor EnviroDome

housings provider an operating temperature range down to

-40°C (-40°F). The optional “XT” extreme temperature kit

allows AutoDome to operate in temperatures down

to -60°C (-76°F), ensuring reliable operation in even the

harshest environments.

All housings come standard with a rugged polycarbonate

bubble, recessed set screws, and a recessed bubble latch

to reduce the chance of damage from vandalism. Inside the

dome, the power, data, and video are all protected against

unexpected surges of power.

Ease of installation and servicing

Bosch’s innovative software, the Configuration Tool for

Imaging Devices (CTFID), allows operators or technicians

to control the PTZ, change camera settings, and even

update firmware from virtually anywhere without need for

additional wiring. For the new Ethernet versions, an

embedded Web server lets the installer access all the user

settings, make camera adjustments, and update firmware

via a standard Web browser.

AutoDome’s innovative design simplifies installation and

servicing. AutoDome reduces maintenance costs because

you can replace individual modules instead of entire camera

assemblies. Simply pop out the old module and slide in the

new: it’s almost as easy as changing a light bulb. All tethers

have been replaced with hinges, making installation and

servicing safer and easier. You can even access the built-in

power supply without taking down the dome.

The AutoDome 300 Series has advanced built-in diagnostics

to simplify service and minimize downtime. Using the On

Screen Display (OSD), a technician can quickly and easily

check critical parameters (such as internal temperature and

input voltage level) to verify that the dome is functioning

within acceptable operating limits. If video is not present, a

local inspection of three diagnostic LEDs at the camera site

can identify the presence of video and control data.

Feature Comparison Matrix

The following table provides an overview of the AutoDome

camera family and its available features:

Preset Shots 64 99 99

High Speed PTZ

Interchangeable Modules

Day/Night Operation

High Resolution Camera

Alarm Inputs 7/4 7/4

Guard Tour

SensUp Extended Sensitivity

IR Sensitive

Cable Compensation

Bilinx Remote Conﬁguration*

Hybrid Analog/IP Connectivity

UTP/Coax Transmission

Ruggedized, Vandal-Resistant Enclosure

Hot-Swap Camera Modules

Image Stabilization

Video Motion Detection

AutoTrack II Motion Tracking

Advanced Features

Advanced Alarm Control

Privacy Masking and Sector Blanking

AutoDome

100 Series

AutoDome

200 Series

AutoDome

300 Series

AutoDome

500i Series

Standard Features

Preset Tour

*Compatible over Coax and UTP transmission only. Remote configuration

over IP via web interface.

Certifications and Approvals

Electromagnetic Com-

patibility (EMC)

Complies with FCC Part 15, ICES-003, and CE

regulations, including EN50130-4 and

EN50121-4

Product Safety Complies with CE regulations, UL, CSA, EN, and

IEC Standards

Patents D424,087, 7,111,998, 7,217,045, 7,306,383,

D561,808

www.boschsecurity.com

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Bosch AutoDome User Manual Page 3

Comments to this Manuals

Related products and manuals for Bridge cameras Bosch AutoDome